GRM552B11H102KA01D datasheet(200/221 Pages) MURATA

200 / 221 page

Safety Standard Certified Type GC/GD/GF/GB Specifications and Test Methods

Continued from the preceding page.

*1 "Room condition" Temperature: 15 to 35

D, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

*2 "C" expresses nominal capacitance value (pF).

The capacitor under test should be held in the flame in the

position which best promotes burning. Each specimen should

be exposed to the flame only once. Time of exposure to flame:

30 sec.

Length of flame : 12

T1mm

Gas burner

: Length 35mm min.

Inside Dia.

0.5

T0.1mm

Outside Dia. 0.9mm max.

Gas

: Butane gas Purity 95% min.

Passive

Flammability

The burning time should not exceed 30 sec.

The tissue paper should not ignite.

The capacitor should be individually wrapped in at least one but

not more than two complete layers of cheesecloth. The

capacitor should be subjected to 20 discharges. The interval

between successive discharges should be 5 sec. The UAC

should be maintained for 2 min. after the last discharge.

C1,2

: 1

µFT10%

: 0.033

µFT5% 10kV

L1 to 4 : 1.5mH

T20% 16A Rod core choke

: 3

µFT5% 10kV

: 100

ΩT2%

: Capacitor under test

UAC

: UR

T5%

: Fuse, Rated 16A

: Rated Voltage

: Voltage applied to Ct

Active

Flammability

The cheesecloth should not be on fire.

Before this test, the test shown in the following is performed.

·Item 11 Adhesive Strength of Termination (apply force is 5N)

·Item 13 Deflection

Apply the rated voltage at 40

T2D and relative humidity of 90 to

95% for 500

W24

Y 0

hrs. Remove and let sit for 24

T2 hrs. at room

condition,*1 then measure.

#Pretreatment for X7R char.

Perform a heat treatment at 150

W 0

Y10

D for 60T5 min. and then

let sit for 24

T2 hrs. at room condition.*1

Humidity

Appearance

No marking defects

Capacitance

Change

D.F.

I.R.

More than 3,000M

Ω

Dielectric

Strength

In accordance with item No.4

No.

Test Method

Specifications

Item

Char.

Capacitance Change

Within

T15%

Within

T5.0% or T0.5pF

(Whichever is larger)

X7R

Char.

Specification

D.F.

V0.05

U275W5/2C*2 (CF30pF)

U350

U30pF)

X7R

Type

2.5kV

5kV

GD, GB

GC, GF

UAC

Oscilloscope

time

Test Specimen

Tissue

About 10mm Thick Board

GA3 Series Specifications and Test Methods

199

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

C02E.pdf

10.12.20

GRM552B11H102KA01D Datasheet(PDF) 200 Page - Murata Manufacturing Co., Ltd.

GRM552B11H102KA01D Datasheet(HTML) 200 Page - Murata Manufacturing Co., Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL