FS32R274VBK2MMM datasheet(12/78 Pages) NXP

12 / 78 page

Table 6. Absolute maximum ratings (continued)

Symbol

Parameter

Conditions

Min

Max

Unit

VDD_LV_PLL0

System PLL supply voltage

—

–0.3

1.5

VDD_LV_LFASTPLL

LFAST PLL supply voltage

—

–0.3

1.5

VDD_HV_ADCREF0/1 ADC_0 and ADC_1 high reference voltage

—

–0.3

5.5

VSS_HV_ADCREF0/1 ADC_0 and ADC_1 ground and low reference

voltage

—

–0.1

0.1

VDD_HV_ADC

3.3 V ADC supply voltage

—

–0.3

4.0 1, 2

VSS_HV_ADC

3.3 V ADC supply ground

—

–0.1

0.1

TVDD

Supply ramp rate6

—

0.00005

0.1

V/μs

VIN_XOSC

Voltage on XOSC pins with respect to ground

—

-0.3

1.47

VINA

Voltage on SAR ADC analog pin with respect to

ground (VSS_HV_ADCREFx)

—

–0.3

6.0

VINA_SD

Voltage on Sigma-Delta ADC analog pin with

respect to ground7

Powered up 8

-0.3

VDD_HV_RAW +

0.3

Powered down

-0.3

1.47

VIN

Voltage on any digital pin with respect to

ground (VSS_HV_IOx)

Relative to

VDD_HV_IOx

–0.3

VDD_HV_IOx + 0.3

VDD_LV_DPHY

MIPICSI2 DPHY voltage supply3, 4, 5

—

–0.3

1.5

VSS_LV_DPHY

MIPICSI2 DPHY supply ground3, 4, 5

—

–0.3

0.3

IINJPAD

Injected input current on any pin during

overload condition11

—

–10

1012

IINJSUM

Absolute sum of all injected input currents

during overload condition

—

–50

TSTG

Storage temperature

—

–55

150

°C

1. 5.3 V for 10 hours cumulative over lifetime of device; 3.3 V +10% for time remaining.

2. Voltage overshoots during a high-to-low or low-to-high transition must not exceed 10 seconds per instance.

3. 1.45 V to 1.5 V allowed for 60 seconds cumulative time at maximum TJ = 150°C; remaining time as defined in note 5 and

note 6.

4. 1.375 V to 1.45 V allowed for 10 hours cumulative time at maximum TJ = 150°C; remaining time as defined in note 6.

5. 1.32 V to 1.375 V range allowed periodically for supply with sinusoidal shape and average supply value below 1.275 V at

maximum TJ=150°C.

6. TVDD is relevant for all external supplies.

7. ADC inputs include an overvoltage detect function that detects any voltage higher than 1.2 V with respect to ground on

either ADC input and open circuit (disconnect) the input in order to prevent damage to the ADC internal circuitry. The ADC

input remains disconnected until the inputs return to the normal operating range.

8. SDADC is powered up and overvoltage protection is ON.

9. SDADC is powered up and overvoltage protection is OFF.

10. Only when VDD_HV_IOx < 3.63 V.

11. No input current injection circuitry on AFE pins.

12. The maximum value of 10 mA applies to pulse injection only. DC current injection is limited to a maximum of 5 mA.

General

S32R274/S32R264 Series Data Sheet, Rev. 6, 06/2021

NXP Semiconductors

FS32R274VBK2MMM Datasheet(PDF) 12 Page - NXP Semiconductors

FS32R274VBK2MMM Datasheet(HTML) 12 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78

Datasheet Download

Link URL