| Electronic Components Datasheet Search |
|
TMP89FS60 Datasheet(PDF) 15 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMP89FS60 Datasheet(HTML) 15 Page - Toshiba Semiconductor |
|
15 / 410 page ![]() Page 1 TMP89FS60 CMOS 8-Bit Microcontroller This product uses the Super Flash ® technology under the licence of Silicon Storage Technology, Inc. Super Flash® is registered trademark of Silicon Storage Technology, Inc. RA000 • The information contained herein is subject to change without notice. 021023_D • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. 021023_A • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equip- ment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instru- ments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. 021023_B • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. 060106_Q • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by impli- cation or otherwise under any patents or other rights of TOSHIBA or the third parties. 070122_C • The products described in this document are subject to foreign exchange and foreign trade control laws. 060925_E • For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter entitled Quality and Reliability Assurance/Handling Precautions. 030619_S TMP89FS60 1.1 Features 1. 8-bit single chip microcomputer TLCS-870/C1 series - Instruction execution time : 125 ns (at 8 MHz) 122 µs (at 32.768 kHz) - 133 types & 732 basic instructions 2. 27 interrupt sources (External : 6 Internal : 21 , Except reset) 3. Input / Output ports (58 pins) Large current output: 8 pins (Typ. 20mA) 4. Watchdog timer - Interrupt or reset can be selected by the program. 5. Power-on reset circuit 6. Voltage detection circuit 7. Divider output function 8. Time base timer 9. 16-bit timer counter : 2 ch - Timer, External trigger, Event Counter, Window, Pulse width measurement, PPG OUTPUT modes The TMP89FS60 is a single-chip 8-bit high-speed and high-functionality microcomputer incorporating 61440 bytes of Flash Memory. Product No. ROM (Flash) RAM Package Emulation Chip TMP89FS60UG 61440 bytes 3072 bytes LQFP64-P-1010-0.50D * TMP89C900XBG TMP89FS60FG QFP64-P-1414-0.80A Note : * ; Under development Note : Two of above pins can not be used for the I/O port, because they should be connected with the high frequency OSC input. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |