| Electronic Components Datasheet Search |
|
R7F100LLL3CFB Datasheet(PDF) 48 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
R7F100LLL3CFB Datasheet(HTML) 48 Page - Renesas Technology Corp |
|
48 / 148 page ![]() RL78/L23 2. Electrical Characteristics R01DS0502EJ0110 Rev.1.10 Page 48 of 145 Oct 31, 2025 2.1 Absolute Maximum Ratings Note 1. Connect the REGC pin to VSS via a capacitor (0.47 to 1 µF). The listed value is the absolute maximum rating of the REGC pin. Only use the capacitor connection. Do not apply a specific voltage to this pin. Note 2. This voltage must be no higher than 6.5 V. Note 3. The voltage on a pin in use for A/D conversion must not exceed AVREFP +0.3. Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any parameter. That is, the absolute maximum ratings are rated values at which the product is on the verge of suffering physical damage, and therefore the product must be used under conditions that ensure that the absolute maximum ratings are not exceeded. Remark 1. The characteristics of functions multiplexed on a given pin are the same as those for the port pin unless otherwise specified. Remark 2. AVREFP refers to the positive reference voltage of the A/D converter. Remark 3. The reference voltage is VSS. (1/2) Item Symbols Conditions Ratings Unit Supply voltage VDD -0.5 to +6.5 V EVSS -0.5 to +0.3 V REGC pin input voltage VIREGC REGC -0.3 to +2.1 and -0.3 to VDD +0.3Note 1 V Input voltage VI1 P00 to P07, P10 to P17, P22 to P27, P30 to P35, P40 to P47, P50 to P57, P64 to P67, P70 to P77, P80 to P87, P90 to P97, P125 to P127, P140 to P147 -0.3 to VDD +0.3Note 2 V VI2 P60 to P63 (N-ch open-drain) -0.3 to +6.5 V VI3 P20, P21, P121 to P124, P137, EXCLK, EXCLKS, RESET -0.3 to VDD +0.3Note 2 V Output voltage VO1 P00 to P07, P10 to P17, P22 to P27, P30 to P35, P40 to P47, P50 to P57, P64 to P67, P70 to P77, P80 to P87, P90 to P97, P125 to P127, P140 to P147 -0.3 to VDD +0.3Note 2 V VO2 P20, P21, P121, P122 -0.3 to VDD +0.3Note 2 V Analog input voltage VAI1 ANI16 to ANI26 -0.3 to VDD +0.3 and -0.3 to AVREFP +0.3Notes 2, 3 V VAI2 ANI0, ANI1 -0.3 to VDD +0.3 and -0.3 to AVREFP +0.3Notes 2, 3 V |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |