PAC1721 datasheet(64/92 Pages) MICROCHIP

64 / 92 page

PAC1721

DS-20007088A-page 64

 2026 Microchip Technology Inc. and its subsidiaries

bit 11:10

GPIO_ALERT1[1:0]: Selects the signals for the A1 pin, GPIO1/ALERT function.

If pin A1 is configured as GPIO pin, the R/W data for the pin is stored in register SMBUS_SETTINGS.

While the A1 pin is multifunction, Microchip recommends using A1 as GPIO/ALERT pin.

00b = ALERT. Functions as ALERT1 pin.

01b = GPIO digital input. Read data from register SMBUS_SETTINGS as input to this pin. (default)

10b = GPIO digital output. Write data from this pin as output to register SMBUS_SETTINGS.

11b = SLOW. Functions as SLOW pin. Pulling the pin high overrides the programmed sample rate and

results in a sample rate of 8 sps (Slow mode). Configuring the pin as SLOW pin takes priority

over other settings, including GPIO Triggered mode.

bit 9:8

SLOW_ALERT0[1:0]: Selects the signals for the A0 pin, SLOW/ALERT function.

If pin A0 is configured as GPIO pin, the R/W data for the pin is stored in register SMBUS_SETTINGS.

While the A0 pin is multifunction, Microchip recommends using A0 as SLOW/ALERT pin.

00b = ALERT. Functions as ALERT0 pin.

01b = GPIO digital input. Read data from register SMBUS_SETTINGS as input to this pin. (default)

10b = GPIO digital output. Write data from this pin as output to register SMBUS_SETTINGS.

11b = SLOW. Functions as SLOW pin. Pulling the pin high overrides the programmed sample rate and

results in a sampling rate of 8 sps (Slow mode). Configuring the pin as SLOW pin takes priority

over other settings, including GPIO Triggered mode.

bit 7:5

AVERAGE[2:0]: Selects how many samples are included in rolling average.

000b = 4

001b = 8 (default)

010b = 16

011b = 32

100b = Reserved. Do not select this option.

101b = 64

110b = Reserved. Do not select this option.

111b = 128

bit 4

AA: Configures Adaptive Accumulation, which emulates a sample mode of 8,192 sps for all samples

rates when using the Slow function. The Adaptive Accumulation function works in conjunction with the

SAMPLE_MODE[3:0] bits.

For more details, see Section 4.8.1 and Section 4.8.2.

0b = Disables adaptive accumulation. The results in the accumulation register do not change when the

SLOW pin is pulled high (default).

1b = Enables adaptive accumulation. The results in the accumulation register change when the SLOW

pin is pulled high to match results obtained at 8,192 sps.

bit 3:2

ACC_CONFIG[1:0]: Configures accumulator to sum VPOWER calculations or VSENSE or VBUS samples.

00b = Accumulator sums VPOWER calculations (default)

01b = Accumulator sums VSENSE measurements

10b = Accumulator sums VBUS measurements

11b = Reserved. Do not select this option.

PAC1721 Datasheet(PDF) 64 Page - Microchip Technology

PAC1721 Datasheet(HTML) 64 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92

Datasheet Download

Link URL