| Electronic Components Datasheet Search |
|
CP3SP33SMS/NOPB Datasheet(PDF) 38 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
CP3SP33SMS/NOPB Datasheet(HTML) 38 Page - Texas Instruments |
|
38 / 407 page ![]() CP3SP33 SNOSCW5 – MAY 2013 www.ti.com Table 9-5. DSP and ASC Registers (continued) NAME ADDRESS DESCRIPTION ASCDDMASEL0 FF 6808h ASC DSP DMA Channel Select Register 0 ASCDDMASEL1 FF 680Ch ASC DSP DMA Channel Select Register 1 ASCDDMASEL2 FF 6810h ASC DSP DMA Channel Select Register 2 ASCDDMASEL3 FF 6814h ASC DSP DMA Channel Select Register 3 ASCINTSEL FF 6818h ASC Interrupt Controller Select Register 9.3.1 ASC DSP Control Register (ADMAC) The ADMAC register is a 16-bit, read/write register used by the CPU to reset the DSP. After reset, this register is 0000h. 15 1 0 Reserved DSPRSTN DSPRSTN The DSP Reset bit is used to assert reset to the DSP. The DSP reset signal is the OR function of this bit and the CPU reset signal. CPU software must set this bit to enable the DSP. 0 – DSP module reset. 1 – DSP module may run (if PCFG.DSPR is clear). 9.3.2 ASC DSP Status Register (ADMAS) The ADMAS register is a 16-bit, read-only register that indicates whether the CPU host interface to the DSP DMA controller is busy and whether the DSP in reset. After reset, this register is 0000h. 15 2 1 0 Reserved RRSTN PBUSY PBUSY The Port Busy bit indicates whether the CPU host interface to the DSP DMA controller is busy. If the DSP write FIFO is full, the DSP read FIFO is empty (and a read has been requested), or the PADR register has been written, this bit will be set. Software must poll the PBUSY bit before using the CPU host interface to access the DSP memory space. 0 – CPU host interface is ready. 1 – CPU host interface is busy. RRSTN The Reflected Reset bit indicates whether the DSP is being held in reset. 0 – DSP is in reset. 1 – DSP is not in reset. 9.3.3 DSP DMA Channel 0 Data Register (PDATA) The PDATA register is a 16-bit, read/write register that provides the CPU with access to the read and write FIFOs for DSP DMA channel 0. Writing the register loads the write FIFO, and reading the register unloads the read FIFO. 15 1 PDATA 38 DSP and Audio Peripherals Copyright © 2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links :CP3SP33 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |