| Electronic Components Datasheet Search |
|
R5F72115D160FPV Datasheet(PDF) 375 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
R5F72115D160FPV Datasheet(HTML) 375 Page - Renesas Technology Corp |
|
375 / 1228 page ![]() Section 10 Multi-Function Timer Pulse Unit 2 (MTU2) Rev. 2.00 May. 08, 2008 Page 351 of 1200 REJ09B0344-0200 Section 10 Multi-Function Timer Pulse Unit 2 (MTU2) This LSI has an on-chip multi-function timer pulse unit 2 (MTU2) that comprises six 16-bit timer channels. 10.1 Features • Maximum 16 pulse input/output lines and three pulse input lines • Selection of eight counter input clocks for each channel (four clocks for channel 5) • The following operations can be set for channels 0 to 4: ⎯ Waveform output at compare match ⎯ Input capture function ⎯ Counter clear operation ⎯ Multiple timer counters (TCNT) can be written to simultaneously ⎯ Simultaneous clearing by compare match and input capture is possible ⎯ Register simultaneous input/output is possible by synchronous counter operation ⎯ A maximum 12-phase PWM output is possible in combination with synchronous operation. However, waveform output by compare match for channel 5 is not possible. • Buffer operation settable for channels 0, 3, and 4 • Phase counting mode settable independently for each of channels 1 and 2 • Cascade connection operation • Fast access via internal 16-bit bus • 28 interrupt sources • Automatic transfer of register data • A/D converter start trigger can be generated • Module standby mode can be settable • A total of six-phase waveform output, which includes complementary PWM output, and positive and negative phases of reset PWM output by interlocking operation of channels 3 and 4, is possible. • AC synchronous motor (brushless DC motor) drive mode using complementary PWM output and reset PWM output is settable by interlocking operation of channels 0, 3, and 4, and the selection of two types of waveform outputs (chopping and level) is possible. • Dead time compensation counter available in channel 5 • In complementary PWM mode, interrupts at the crest and trough of the counter value and A/D converter start triggers can be skipped. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |