R5F72115D160FPV datasheet(125/1228 Pages) RENESAS

125 / 1228 page

Section 6 Interrupt Controller (INTC)

Rev. 2.00 May. 08, 2008 Page 101 of 1200

REJ09B0344-0200

Section 6 Interrupt Controller (INTC)

The interrupt controller (INTC) ascertains the priority of interrupt sources and controls interrupt

requests to the CPU. The INTC registers set the order of priority of each interrupt, allowing the

user to process interrupt requests according to the user-set priority.

6.1

Features

• 16 levels of interrupt priority can be set

By setting the thirteen interrupt priority registers, the priorities of IRQ interrupts and on-chip

peripheral module interrupts can be selected from 16 levels for request sources.

• NMI noise canceler function

An NMI input-level bit indicates the NMI pin state. By reading this bit in the interrupt

exception service routine, the pin state can be checked, enabling it to be used as the noise

canceler function.

• Occurrence of interrupt can be reported externally (IRQOUT pin)

For example, when this LSI has released the bus mastership, this LSI can inform the external

bus master of occurrence of an on-chip peripheral module interrupt and request for the bus

mastership.

• Register banks

This LSI has register banks that enable register saving and restoration required in the interrupt

processing to be performed at high speed.

R5F72115D160FPV Datasheet(PDF) 125 Page - Renesas Technology Corp